When you first started riding a motorcycle, you must have frequently heard the following advice: “You can’t only ride it; you must also be able to maintain it.” In other words, you must also be familiar with the primary components of a motorcycle. For your safety, this article will cover the considerations you should make before riding your motorcycle.
If you already know which parts to monitor, you can at least determine when spare parts require replacement or maintenance. Or, even better, you can solve minor issues while on the road. Here are some descriptions of motorbike parts to which you should pay close attention.
1. Motorbike tires
Aside from the most vital components, it appears that you cannot ignore these spare parts. However, you should not disregard the condition of your motorcycle’s tires. On motorcycle tires, there are three components that require your attention: the condition of the tire valve, the outer tire, and the rear tire. If you don’t pay attention to the three components, your spending budget is also not little.
2. Motorcycle accumulator battery
The battery is another key component of the motorcycle. Similar to any other car, if the vehicle battery does not function, the vehicle cannot be operated. Therefore, you should frequently inspect your motorcycle’s battery.
3. Motorcycle spark plug
What is an ignition plug? A spark plug is a component of the engine that ignites the fire during the combustion process of your motorcycle’s engine. This spark plug, when attached to a gas lighter, fires the spark. Because this replaceable part is readily damaged, it is advised that you always carry a spare with you. Even though the price is little, you will be in a lot of trouble if you do not have a spare tire for your motorcycle.
4. Motorcycle chain
Motorcycles, like standard bicycles, use a chain to connect the engine revolutions to the tire rotations. Obviously, a motor cannot function properly if this component does not exist or functions improperly.
5. Oil
Similar to its application in other fields, oil works as a motor lubricant so that the engine’s gears are not readily destroyed. Consequently, it must be replaced at least every two months. Or, check your oil change card and compare your motorcycle’s speedometer to the recommended speedometer listed on the card.
6. Brake
Before riding your motorcycle, you should inspect its braking system. The trick is to walk slowly and then abruptly step on or apply the brakes to feel their grip. The reason for this is that if you don’t verify it first, numerous unpleasant scenarios can occur for you and others in the future.
7. Lights
You should inspect the condition of your motorcycle’s lights, from the headlights to the brake lights, for the safety of yourself and others on the road. Each lamp has its unique function, appearance, and light intensity. Consequently, one motor type cannot have lights on the other motor type.
8. Motorcycle carburetor
The job of the carburetor is to ensure that the fuel transmission runs smoothly. This section is responsible for providing gasoline to the combustion chamber of the engine.
